Gas spills are not the influence of drugs or alcohol. Thanks for the words of encouragement. I sanded down the exhaust manifold, flywheel housing and cover. If they disconnected it, then you have to make sure the oil pump shaft has been removed from the engine and the inlet to the pump has been pluged. These manuals are from Seadoo Direct, and can be printed or just read on the computer as they are in a pdf file. This boat is going to nickel and dime me to death. In many gine specifications, must be placed on instances proper tools and training each boat at the time of manufacture.
If so, the 6k rpm at 10mph is a good indication. Lubrication of the following items should be performed every 50 hours in. That's great news the dealer is going to stand behind there service! Post 21 you need to make 2 marks. And the bad: Some dealers and mechanics will charge exhorbitant amounts for replacing or rebuilding a motor. Besure to have the dealer check the oil pump adjustment on the cable and do a good double check of the install the old mechanic did just for confidence of it being correct. Mark the level in your oil tank with a sharpie and after running it, check the oil level. With Sea-Doo sport boats powered by Rotax engines, a break-in period of 10 hours is required before continuous operation at full throttle.
I bought my first boat 2 days ago and not even sure how to use the 3 knobs one is lights I believe on the left or the 3 handles on the right. I know once that engine's working you will love your boat! While I have the pump off, should I look for anything else? Good luck, and thanks for coming back for a visit. It may also be used boat dealer. The original carburetors are pretty trashed. You must remove the pump and pull the drive shaft completely off of the boat.
My plan is to have the boat in turn key shape by the end of this month. I don't know what, if anything you can do. I bought one of their engines and carb rebuild kit. Using the deck lights for a prolonged. Yeah, I'm on one of those 12 hour rotating shift kinda work schedules. Please read the following labels carefully before operating your boat.
They look very similar minus a few components. Is the installing dealer a authorized seadoo dealer? Since you have the pump off. I'll never leave you digging through hundreds or even thousands of pages to find what you need. You or your passenger s ways keep a safe distance from all could be violently ejected forward other craft, people and objects. Always wipe er you can perform the following oper- off any fuel spillage from the boat. You should still be able to order your parts though.
Disconnect the safety lanyard when stopped to help prevent ac- F09L06Y cidental starting. I was told to run the new motor with high test gas and put a pint of synthetic oil in the gas. I can't wait for this part haha. It is weird that he disassembled the old engine and bought a new one and then decided to sell it. If your rotary valve chamber is not still connect to this tank, do not run the engine.
Tomorrow I'm going to time the rotary valve. Avoid fueling at night except under — Never operate a boat while under well-lit conditions. As Karl said, you need to find out if your engine is still using the oil injection tank. If a question or problem arises regarding warranty, first contact the service manager or owner of the Sea-Doo sport boat dealership. Should you prefer not to receive information on our products, services and offers, please let us know by writing to the address below.
Call me crazy but I bet that's what there talking about. They also said they would do the fly wheel and timing for free. Anyone know what could have caused this? Does you boat still use the Injector system and tank? Grip the grab handle and pull yourself up until your knee can reach the swim platform. . I cleaned this boat from stem to stern mint cond. Turning the steering lanyards programmed, refer to an au- wheel clockwise steers the boat to the thorized Sea-Doo sport boat dealer. Stay away from other boats, channels, beaches, restrict- 2.