Refer to the diagram inside the remote entry transmitter for the correct orientation of the battery. Remove the jumper cable from the ground metal surface. This condensation is normal and will clear within 45 minutes of headlamp operation. This indicates the safety belt is now in the automatic locking mode. Start the engine of the booster vehicle and run the engine at moderately increased speed. Install and tighten the fill plug securely.
The speed control may shut off automatically when you are towing on long, steep grades. Turn off the engine and remove the key. Copyright © 2006 Ford Motor Company. To obtain reimbursement information, U. You decide to go golfing. Don't waste time calling around to your local bookstores or waiting for a repair manual to arrive by mail.
Below are a list of that you can download and print out for your personal use. After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions. Inflate all tires to the inflation pressure recommended by Ford Motor Company. As the belt retracts, you will hear a clicking sound. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount.
This operation is considered normal and will fully update transmission operation to its optimum shift feel. Refer to Fuses and relays in the Roadside Emergencies chapter. Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved. Refer to the Maintenance product specifications and capacities section in this chapter. Ford Pick-Ups, Expedition and Navigator Chilton Repair Manual covering Ford F-150 1997-03 , F-150 Heritage 2004 , F-250 1997-99 Pick-Ups; Ford Expedition. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
Open the reading lamp assembly. Get access to our 2007 Ford Focus repair information right now, online. Note: The interior lamps will illuminate. Safety belt assemblies should be inspected by an authorized dealer and must be replaced if either damage or improper operation is noted. Set the parking brake and shift to P Park. Canadian customers who require roadside assistance, call 1—800—665—2006. Booster seats position a child so that safety belts fit better.
Driving the vehicle without repairing the engine problem increases the chance of engine damage. The flow of fuel through a fuel pump nozzle can produce static electricity, which can cause a fire if fuel is pumped into an ungrounded fuel container. Press the battery down to ensure that the battery is fully seated in the battery housing cavity. The fuel system may be under pressure. Restart the engine and take your vehicle to an authorized dealer. Pull the bulb straight out of the socket.
The cover can be removed completely by pressing inward on both ends of the support. Small children are particularly at risk. We're always updating this site with the latest ford focus manuals and maintenance guides. Position the child safety seat in a seat with a combination lap and shoulder belt. Go to the front of the vehicle and release the auxiliary latch that is located under the front of the hood. Speed sensitive volume: Radio volume automatically adjusts according to vehicle speed to compensate for road and wind noise. Pull the bulb straight out and replace it.
Do not tow with a slingbelt. Ford or Mercury vehicles customers call 1—800—241—3673;. Remove the front splash shield from the bumper. Please take the time to get well acquainted with your vehicle by reading this handbook. Available engines are the lightweight, high-efficiency 2. The vehicle has run out of fuel—the engine may misfire or run poorly. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road.